-- This module defines enterprise MIBs for SNMP setting
-- 
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.

NETSCREEN-SET-SNMP-MIB DEFINITIONS ::= BEGIN

IMPORTS
--PSIM(Modif)     netscreenSettingMibModule
    netscreenSettingMibModule, netscreenSetting
        FROM NETSCREEN-SMI
    Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DisplayString
        FROM SNMPv2-TC
    ;

netscreenSetSnmpMibModule MODULE-IDENTITY
    LAST-UPDATED  "200405032022Z" -- May 03, 2004
    ORGANIZATION
        "Juniper Networks, Inc."
    CONTACT-INFO
        "Customer Support

         1194 North Mathilda Avenue 
         Sunnyvale, California 94089-1206
         USA

         Tel: 1-800-638-8296
         E-mail: customerservice@juniper.net
         HTTP://www.juniper.net"
    DESCRIPTION
        "This module defines the object that are used to monitor 
         SNMP setting"
    REVISION      "200405030000Z" -- May 03, 2004
    DESCRIPTION
        "Modified copyright and contact information"
    REVISION      "200403030000Z" -- March 03, 2004
    DESCRIPTION
        "Converted to SMIv2 by Longview Software"
    REVISION      "200311100000Z" -- November 10, 2003
    DESCRIPTION
        "Correct spelling mistake"
    REVISION      "200109280000Z" -- September 28, 2001
    DESCRIPTION
        "No Comment"
    REVISION      "200105270000Z" -- May 27, 2001
    DESCRIPTION
        "Creation Date"
    ::= { netscreenSettingMibModule 9 }

NsSetSnmpCommHostEntry ::= SEQUENCE
{
    nsSetSnmpCommHostIndex      Integer32,
    nsSetSnmpCommunity          DisplayString,
    nsSetSnmpHostInComm         IpAddress,
    nsSetSnmpWritePermit        INTEGER,
    nsSetSnmpTrapPermit         INTEGER,
    nsSetSnmpTrafficAlarmPermit INTEGER
}

nsSetSNMP OBJECT IDENTIFIER ::= { netscreenSetting 9 }

nsSetSnmpSysName OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..255))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "SNMP agent's sysname."
    ::= { nsSetSNMP 1 }

nsSetSnmpContact OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..255))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "contact name."
    ::= { nsSetSNMP 2 }

nsSetSnmpLocation OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..255))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "SNMP agent Location."
    ::= { nsSetSNMP 3 }

nsSetSnmpVPNEnable OBJECT-TYPE
    SYNTAX        INTEGER {
        disable(0),
        enabled(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Secure SNMP traffic via VPN encryption"
    ::= { nsSetSNMP 4 }

nsSetSnmpCommHostTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF NsSetSnmpCommHostEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The snmp community and host table"
    ::= { nsSetSNMP 5 }

nsSetSnmpCommHostEntry OBJECT-TYPE
    SYNTAX        NsSetSnmpCommHostEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "An entry containing community and hosts information"
    INDEX
        { nsSetSnmpCommHostIndex }
    ::= { nsSetSnmpCommHostTable 1 }

nsSetSnmpCommHostIndex OBJECT-TYPE
    SYNTAX        Integer32 (0..2147483647)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A unique value for snmp community & host table.  Its value
         ranges between 0 and 65535 and may not be contiguous."
    ::= { nsSetSnmpCommHostEntry 1 }

nsSetSnmpCommunity OBJECT-TYPE
    SYNTAX        DisplayString (SIZE(0..32))
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "SNMP community name."
    ::= { nsSetSnmpCommHostEntry 2 }

nsSetSnmpHostInComm OBJECT-TYPE
    SYNTAX        IpAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "SNMP host ip address."
    ::= { nsSetSnmpCommHostEntry 3 }

nsSetSnmpWritePermit OBJECT-TYPE
    SYNTAX        INTEGER {
        no(0),
        yes(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Permission to write."
    ::= { nsSetSnmpCommHostEntry 4 }

nsSetSnmpTrapPermit OBJECT-TYPE
    SYNTAX        INTEGER {
        no(0),
        yes(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Permission to receive trap."
    ::= { nsSetSnmpCommHostEntry 5 }

nsSetSnmpTrafficAlarmPermit OBJECT-TYPE
    SYNTAX        INTEGER {
        no(0),
        yes(1)
    }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Permission of including traffic alarm in trap."
    ::= { nsSetSnmpCommHostEntry 6 }

END